Diagnosing Phone Screen Faults
"The screen is broken" is not a diagnosis. Different symptoms point at different parts, and some of them need no screen at all. Read the symptom first, then decide.
Fixed vertical or horizontal lines
Coloured or white lines that do not change with what is on screen. The cause is usually damage in the panel itself or in the screen connector, most often after a drop or pressure. If they appeared and then spread over days, the panel is on its way out.
Try first: disconnect the screen connector and reseat it firmly — it is sometimes loose after an earlier repair. Then: a complete screen.
A black patch that grows
It starts small and spreads day by day. This is a leak in the panel after pressure or an internal crack. It cannot be repaired and it does not stop. What you need: a screen.
White or pale patches under pressure
These appear on LCD screens when the backlight has been pressed — sitting down with the phone in a back pocket, typically. What you need: a screen.
The picture is fine but touch does not respond
If the image is perfect and touch is dead, either completely or in one area, the problem is the touch layer or its connector. If touch responds somewhere other than where you touched, or moves on its own, that is "ghost touch", and the usual causes are a poor-quality screen or an unsuitable charger.
Try first: remove the tempered-glass protector if it is cracked or lifting at the edges, restart the phone, and try an original charger.
A black screen while the phone is running
The phone rings and notifications arrive, but the screen stays black. One simple test here saves you from buying the wrong part:
The torch test: turn off the lights and shine a torch across the screen at an angle. If you can see a faint image, the display is working and the backlight is what failed — still a screen fault, but it confirms the motherboard is sound. If no image appears at all, the problem may be the screen or the board, and that needs a technician.
The screen flickers or dims by itself
Check automatic brightness and power-saving mode first. If the flicker continues and has nothing to do with the ambient light, it is usually a loose connector or a panel about to fail.
Before you order a screen
- Know your model number, not just the phone's name.
- Decide: with frame or without? With frame is far easier to fit.
- Know which panel type you want — OLED, TFT or Incell.
- Check whether your phone has an under-display fingerprint reader; that changes which part you need.